东芝163代码(国外英语资料).doc

东芝163代码 Maintenance hints. Toshiba 163165166203 aircraft maintenance appears small wrench, but does not affect the normal use, can also according to the 08 boot, AD, when you enter 251 press start, will display a two figure 72 (example: 72) you can enter 0, then press operation insert key and then enter 252 press the start , will also display a two digit number ( 80 ) then you can enter 0 and then to work according to the start button to insert shutdown, restart OK. Toshiba copier maintenance code Daquan Author: Collection Toshiba copier maintenance code Daquan At the same time press 0 and 1 keys to open the power panel lights all lit, press the remove / stop button to lift At the same time press 0 and 2 keys to open the power, the machine into the aging mode, display AG, and press 09 keys to lift At the same time press 03 or 04 button to turn on the power, the machine enters the input / output check mode, shows CH, input different code, can start different parts, such as 03-33 light check At the same time press 0 and 6 keys to turn on the power and force to start the fuser not heated At the same time press 0 and 7 keys to open the power supply, automatic feeder aging mode, display AG, press 09 to exit Press the 03/04 button to turn on the power at the same time, enter the input / output check status, display CH, exit and press the 09 key 1 main motor ON 11 OFF 2 feed roll clutch ON 12 OFF 3 positioning roller clutch ON 13 OFF 6 toner motor ON 16 OFF 7 cooling fan ON 17 OFF 10 the main counter press the P key 20 scan the motor, press P to move 50%, and press P key 200% 21 lens motor, press P button to move 50%, press P key 200% 22 mirror motor, press P button to move 50%, and press P key 200% 31 transfer output press P key ON, press P again, OFF 32 separate output, press P, ON, and then press P, OFF Bo 33 light output press P ON press P key OFF 34 pre transfer bias, press the P key ON, and then press the P key OFF 40 press the carton, press the P key ON, and then pr