免烧砖机原理(国外英语资料).docVIP

免烧砖机原理 Industrial waste brick (hereinafter referred to as unburned) is based on the subjects of industrial waste, such as cement and lime as a binder, pressing with the other agent, the nature conservation from the. In recent years, industrial waste residue unburned brick has developed rapidly in our country, and has become one of the important new wall materials. Http:/// Industrial waste unburned brick and sintered brick compared because of the use of industrial waste, without sintering and autoclaved brick, production cost low; eat large amount of slag, social and environmental benefits; the edges neat, accurate size, compressive strength is higher than 7.5MPa; density, water absorption, good durability. 1, production of industrial waste residue, unburned brick raw materials The production of industrial waste residue unburned brick raw materials generally include 3 parts: industrial waste residue, curing agents and admixtures 1.1 industrial waste residue Industrial waste residue plays a major role in the production of unburned bricks. Many industrial waste can be used to produce unburned brick, including fly ash, steel slag, nonferrous metal smelting factory smelting slag, various mining tailings, electrolytic copper Tan, chemical waste gypsum and chemical lime, construction waste brick construction waste, etc.. All kinds of industrial waste residue of chemical composition, mineral composition, harmful substances and in the use of the good and bad effects are not the same, so the production of industrial waste unburned brick, should be after the analysis of the characteristics of waste residue, according to its strength forming mechanism, formulate reasonable formula. Some industrial waste, adding an appropriate amount of curing agent and additives, can be used to make brick: such as the use of fly ash, river sand and add lime, gypsum, cement and compound additives, production of industrial waste unburned 28d strength up to 31MPa; and if, after pretreatment of z