可靠性论文设计(国外英语资料).docVIP

可靠性论文设计 Fuzzy reliability design of machine tool spindle Fuzzy reliability design of machine tool spindle and fuzzy reliability design of machine tool spindle Fuzzy reliability design of machine tool spindle Yang Kun Yang Kun Yang Kun Yang Kun mechanism Mechanism Mechanism 082 (080301211) 082 (080301211) 082 (080301211) 082 (080301211) pick Pick pick want Want to This paper describes the problems existing in the spindle design of the conventional machine tools, and puts forward a proposal for the design of the main parts of the machine tools The paste reliability design is applied to the rigidity check of the main shaft Depending on the design process and results, as well as the difference from the conventional reliability design, the spindle is employed The necessity of fuzzy reliability design. Key word Keywords keywords Key word: :: Machine tool spindle; fuzzy reliability design; rigidity checking introduction Introduction Introduction： :: : Spindle parts are important parts of machine tools, and their performance on the performance of the entire machine tool and Machining quality and machine tool productivity have a direct impact, while a good performance of spindle components There must be enough stiffness. The common machine tool spindle bears bending force and is expressed by bending rigidity, The bending stiffness is measured by the deflection at the end of the spindle. The traditional stiffness check is to control the end of the spindle The deformation of Y is not greater than the allowable value of [y0], which is less than [y Y0], this approach is unscientific Of. For example: [y0] =0. 005, such as the actual y = 0.0049, can not simply believe that the spindle is absolutely reliable; such as the actual y = 0.0051, should not simply think that The spindle is absolutely unreliable. It is well known that the randomness of a shaft drive has a certain probability The uncertainty and uncertainty of each event in the set of events (Engineering Practice) Another k