四角布置直流燃烧器锅炉燃烧调整(国外英语资料).doc

四角布置直流燃烧器锅炉燃烧调整 Combustion regulation of four corner burner with direct current burner 1, four corner burner principle fficeffice / The direct current burner is usually arranged on the four corners of the furnace. When the pulverized coal stream flows out of the jet nozzle, it is a direct current jet, but when When four air currents arrive at the central part of the furnace, they converge in the form of a tangential circle, A swirling combustion flame is formed, and a downward swirl of airflow is formed in the hearth. 1.1. The working process of direct current burner: (1) the process of heating the high temperature smoke by pulverized coal stream; (2) the air supply and pressure balance process on both sides of the jet; (3) the ignition process of pulverized coal stream; (4) the mixing process between pulverized coal and two air; (5) the tangential rotation of air flow; (6) the process of coke burning. Although several of these processes are in sequence or some process at the same time, but the interaction between the various processes is very significant The process of absorbing high temperature smoke by a main air stream. The airflow ejected from the burner nozzle remains at high speed. Due to the turbulent diffusion of air flow Driving the surrounding hot smoke along a forward flow, this phenomenon is called roll suction.. As a result of entrainment, the jet continues to expand, constantly to four Zhou Kuozhang. At the same time, the velocity of the main air stream decreases as a result of attenuation. Because of the entrainment effect of jet, high temperature flue gas The heat is continuously transported to the new pulverized coal air flowing into the furnace, and the pulverized coal stream is heated continuously to raise temperature When enough heat is reached and the ignition temperature begins, the fire begins at the outer edge of the gas stream, and the flame rapidly travels deeper into the air stream Steady state of ignition. 1.2, the impact of lighting ef