布袋除尘器2(国外英语资料).doc

布袋除尘器2 Bag dust collector, 2.txt Product details: Click: 857 times Bag dust collector The working mechanism of dust collector is dust containing gas through the filter material, the dust is filtered, the filter material to trap coarse dust mainly depends on the inertial collision, collecting fine dust mainly by diffusion and sieving effect. Filter dust layer also has a certain filtering effect. The dust removal efficiency of bag filter is related to many factors, but mainly depends on the filter material. The filter material of the bag filter is the fabric or felt made of synthetic fiber, natural fiber or glass fiber. Sew a cloth or felt into a cylinder or a flat filter bag as needed. According to the nature of the smoke, the filter material suitable for the application condition is selected. Usually, the flue gas temperature is below 120 DEG C, filter medium for having acid resistance and durability of the case, often used in polyester velvet and polyester felt; in the treatment of high temperature gas (250 C), using graphite glass cloth; in some special cases, using carbon fiber filter etc.. In the operation of bag filter, it is important to control the speed of flue gas passing through the filter material (called filter speed). Generally, the filtration rate is 0.5 - 2m / min, and the particle efficiency is greater than 99% for 0.1micro and m, and the equipment resistance loss is about 980 - I470Pa. Bag dust collector is subdivided into more kinds. Today, I will introduce a kind of JDMC series pulse long bag dust collector JDMC series pulse long bag dust collector is the companys engineering and technical personnel in the injection pulse (jet pulse) based on the dust removal technology, and to meet the needs of air flue gas purification and the development of the pressing pulse bag filter. It not only has the ability of anti than cleaning bag filter, high efficiency, low emission concentration, but also has the characteristics of stable and reliable, low consump