拉力试验机注意事项(国外英语资料).doc

拉力试验机注意事项 Points for attention of HD-B605S computer double column tensile testing machine: 1, first of all should consider the need to test the tensile range of materials: The difference of the tension range determines the difference of the sensors used, and determines the structure of the tensile machine, but this has little effect on the price (except for the door type). For general flexible packaging manufacturers, the tension range of 100 Newtons is enough. So its OK to use one arm. A single arm structure is a portal structure that is adapted to greater tension, such as a ton or more. Therefore, soft packaging manufacturers basically do not need. 2, test the problem of the trip: According to the performance requirements and the need to test the soft packing film, you can travel in 6001500mm. Material elongation of more than 1000%, you can choose 1000 or 1200mm travel. 3, standard configuration problems: Intelligent three basic configuration: host, microcomputer, and printer, if the microcomputer function is strong, you can print directly. It can also be equipped with an ordinary computer. With computers, complex data analysis can be carried out, such as data editing, local amplification, adjustable reporting format, and statistical analysis of group patterns. If equipped with a computer, manufacturers should be added to the corresponding control system. 4, output results: The output results can be set arbitrarily: the maximum force value, elongation, tensile strength, elongation, elongation Changli value, yield strength, elastic modulus, maximum stress test 8. The supply of paper tensile testing machine, which can be described as microcomputer operation, the output of the most comprehensive results. Some foreign manufacturers of products, you can generally export these 8. Some domestic manufacturers can output 5-6 items, and some manufacturers can only output the maximum force value, average value, minimum value of three items. 5, on the experimental project: F