无负压供水(国外英语资料).doc

无负压供水 The bidirectional compensator starts to work, the high-pressure water pump outlet to the high-pressure chamber end to water, when the liquid nitrogen increased gradually, with pressure being squeezed back to the energy storage device, thus completing the process of the low peak to the tank water, when the peak of water drop or municipal pipe network pressure, the release of energy storage device energy added to the constant pressure cavity extrusion high pressure chamber water, together with the constant pressure cavity to the user with municipal water replenishment, thus completing the process of peak water to users. 3 energy storage Nitrogen energy storage built-in preloading are not soluble in water, when the peak of water, energy release high pressure chamber water pressure to the extrusion cavity network, make full use of the principle of the law of conservation of energy, to achieve the peak water users, to ensure the water in the pot to the greatest degree of compensation to the user in the network, suppression of negative pressure generated, guarantee without affecting the municipal pipe network. 3 control points edit control technology Non negative pressure water supply system is set to a constant pressure value, if the pipe pressure is higher than the set pressure value, the pressure transmitter pipeline pressure feedback to the frequency conversion control cabinet, tap water by direct supply pipeline directly to the user on the user water supply pipe network. When the water changes the pipe pressure below the set pressure of the pressure of the municipal pipe network or network users, pressure transmitter pipeline pressure feedback to the controller PID frequency conversion control cabinet, adjust the output frequency of inverter through UPC watchdog controller, and start the water pump control pump speed to maintain a constant pressure water supply; if the tap water can not fully meet the (water or all) requirements, the central control center wil