测试方法(国外英语资料).docVIP

测试方法 Today, I looked at the test method I saw yesterday and summarized it as follows: 1. installation test method The purpose of the test is to confirm the installation and suitability of all indoor and outdoor YAAN products. 1.1 samples for spherical camera or ball head installation steps: the installation of cameras, set the dial switch, installation machine, lanyards, ball cover, and the bracket is connected and fixed, connecting cable and electricity, check the function can be realized, the reverse recovery equipment remove the original packaging. 1.2 samples for the ordinary seat type head installation steps: set the dial switch, can install the protective cover, and the use of the maximum recommended bracket is connected and fixed and connected head shield cable, power cable, PTZ external check function, remove the reverse equipment to restore the original packaging. Conclusion: this test guarantees the safety and rationality of our product installation, and what kind of support is suitable and what kind of environment, which has accumulated experience for our indoor and outdoor installation. 2. test method of power adaptability The purpose of the test is to test the adaptability of the products power supply. However, the selected voltage is 24V, 18V, 30V, then our product manual wide voltage of 25%, 20%, 10%, how to explain? Test method for the sample: when the rated voltage is AC24V, the regulator to adjust the power output of AC24V, the power supply is switched on, using a multimeter to test the output current, the manual control function of PTZ camera function, for an hour, and then adjust the voltage were AC18V, AC30V, repeat the above process, the test voltage of the project are: / current, power on self test, horizontal / vertical speed, automatic cruise, image noise, jitter free without interference. Conclusion: our products can still work normally in the range of 25% voltage fluctuation. 3. connection test method The purpose of the test is to confirm