煤层气(国外英语资料).docVIP

煤层气 1. coalbed methane: English name CBM, refers to the formation and presence of natural gas in the coal seam, its main component is methane, accounting for more than 70%.. 2. critical analytic pressure: the critical analytical pressure is the corresponding pressure value when the gas begins to resolve in the process of coal seam depressurization. 3. production pressure difference: the difference between the production pressure and the fluid pressure at the bottom is called the production pressure difference. 4. flow pressure: when producing well, the pressure in the middle of producing layer is called flowing pressure, also called bottom hole pressure. 5. tubing pressure: flow pressure from the bottom of the oil and gas through the tubing to the wellhead after the remaining pressure, known as tubing pressure, referred to as oil pressure. 6. casing pressure: refers to the flow pressure from the bottom of the oil and gas flowing through the annular space between the oil pipe lift to the wellhead after the remaining pressure, referred to as sleeve pressure. 7. static liquid: refers to the stable level of non flowing wells in the wellbore after shut. 8.: the liquid level is between the dynamic liquid level of non flowing wells in the production tubing and casing annular space. 9. permeability: it is the measure of the size of coal and rock seepage fluid, it is the most critical parameter in the methane extraction of coalbed methane, and also the most complex and difficult to determine parameters. 10. porosity: the ratio of the volume of all pore space in the coal and rock to the volume of the rock sample is called the total porosity of the coal rock, expressed as a percentage. 11., decompression difference: the difference between the coal seam pressure and the critical analytical pressure of the gas is the difference between the earth pressure and the ground pressure. 12. stroke: refers to the maximum displacement on the polished rod pumping unit horsehead on recipro