物理三导答案(国外英语资料).doc

物理三导答案 The longer the property is made. Three, suspected cases: Spring dynamometer in use, should pay attention to what? Answer: Spring dynamometer is in use to clear: to make the pointer at the zero line 1 before measuring, namely zero. The clear spring dynamometer range and division value. The measurement, to make the direction with the elongation of the spring force in the direction of the same line. Four, guide training standards: 1. in the use of spring dynamometer force, to observe its range (i.e. maximum measurement range) and index value, but also the pointer is in the zero line, to check the pointer and spring is shell stuck, so that it can be freely telescopic; in spring dynamometer force on the range over Xu is not allowed it. The force of 2.1N is about (D) 3. a test about 6N, should choose the most appropriate spring dynamometer is (A) 4. static spring dynamometer by in the opposite direction, the size is 4N two F1 and F2, then the number of spring ergometer is 4 N. Page 19 Three, suspected cases: Answer: shot is affected by gravity and resistance, and the force of the object is earth and air. Four, guide training standards: The correct understanding of 1.g = 9.8N/kg is (C) An object with 2. heavy 490N may be (B) 3. when a student in a physics experiment group explores the relationship between the gravity of objects and the mass of objects, the experimental data are recorded as follows: Object under test Object mass m (kg) Gravity G (N) Ratio G/m (N/kg) The mean value of the ratio G/m (N/kg) Object 1 Zero point one Zero point nine nine Nine point nine Nine point eight Object 2 Zero point two One point nine six Nine point eight Object 3 Zero point three Two point nine one Nine point seven (1) in the experimental process, need to use measuring tools to measure object spring dynamometer by gravity; (2) fill out the average value of the ratio G/m in the blank space; (3) analyzing the experimental data in the table, it is concluded that the gravity of the obj