电力拖动复习题(国外英语资料).docVIP

电力拖动复习题 Review of the fundamentals of electric traction review 1.. Why do DCM generators and motor principles always appear at the same time? 2., the higher the speed of the DCM excitation, the greater the potential in the rotating armature, and the higher the rotational speed of the asynchronous motor, the smaller the potential in the rotor 3. why does the current in the edge of the DCM armature winding component change continuously through the brush and commutator? In 4. DCM, the main flux, that is, the armature winding and the exciting winding, is why the electromotive force is induced only in the armature winding? Which of the following 5. DCM in steady-state volume constant direction, which is the alternative: (1) the excitation current of the armature current (2) (3) (4) the armature EMF EMF in the armature element edge (5) in the current armature bar (6) main pole flux in the magnetic flux (7) armature iron heart 6. why in DCM magnetic saturation when the armature reaction leads to magnetic effect? Why does the armature react badly and the speed of the DCM is unstable when the load is heavy? What are the conditions for DCM to run stably? 7. what are the starting currents of the excited DCM? DCM start should pay attention to what problems can ensure that the motor will not be damaged? What factors determine the armature current during steady operation? Why does the steady state value of the armature current remain the same before and after the speed regulation of the same load? The electromagnetic torque of motor 8. is driven torque properties, electromagnetic torque increases, the speed seems to be rising, but from the mechanical characteristic and speed characteristic of DC motor, the electromagnetic torque increases speed decreased, what is the reason? 9. what factors determine the magnitude of the electromagnetic torque? What is the relationship between the direction of the electromagnetic torque and the mode of operation of the motor? 10. what are the con