电解电容(国外英语资料).docVIP

电解电容Electrolytic capacitor is a capacitor, metal foil as anode (aluminum or tantalum), and close to the cathode metal oxide film (two or five alumina oxide tantalum) are dielectric, the cathode made of conductive material and electrolyte (electrolyte can be liquid or solid) and other materials together, because the electrolyte is the main part of the cathode electrolysis the capacitor so named. Meanwhile, the electrolytic capacitor is positive and negative.Electrolytic capacitor is usually made of metal foil (aluminum / tantalum) as positive electrode, insulating oxide layer of metal foil (alumina / tantalum oxide five) as dielectric, electrolytic capacitors with different positive electrode for aluminum electrolytic capacitors and tantalum electrolytic capacitor. The negative electrode of an aluminum electrolytic capacitor is composed of a thin paper film / electrolyte polymer impregnated with an electrolyte solution (liquid electrolyte); the negative electrode of a tantalum electrolytic capacitor is usually manganese dioxide. The electrolytic capacitor is named after the electrolyte is used as a negative electrode (between the attention and the dielectric).Now the production of aluminum electrolytic capacitor, accounting for second in the capacitor. The capacitor is DC capacitor in general, but now, from DC to AC from low temperature to high temperature, development from low to high pressure, the development from the universal development of special type, type, from the general structure to the development of the flat, book type structure. Its upper limit capacity has been extended to about 4F, the use frequency has reached 30kHz, the operating temperature range has reached -55 - 125 degrees, and some even up to 150 degrees C, the rated voltage has reached 700V. In a word, the development of aluminum electrolytic capacitor is more and more extensive. The basis for these developments is as follows: 1. in the material, the aluminum foil used now is very good in comp