第1章 电机拖动技术(国外英语资料).docVIP

第1章 电机拖动技术 Chapter 1 Structure and working principle of DC motor Nameplate nameplate data of the armature winding armature winding of DC motor structure and working principle of the structure and working principle of DC motor 1.1 DC motor 1.2 DC motor 1.3 DC motor and series DC motor and main series 1.1 the structure and working principle of DC motor the structure and working principle of DC motor The main structure of 1.1.1 DC motor is the main structure of 1.1.1 DC motor Main pole reversing magnetic pole brush device, base end cap, armature core, armature winding, commutator shaft, bearing stator rotor Figure 1-2 profile is 1. pole DC motor armature tooth 2. 3. armature slots 4. main pole 5. excitation winding frame (magnetic yoke) 6. base (7. yoke) compole 8. compole winding 9. armature winding armature core group 10.11. 10. 11. foot Fig. 1-3 commutation pole structure 1. commutation pole core 2. commutation pole winding Fig. 1-4 brush box assembly 1. brush box 2. brush 3. copper wire braid 4. press spring Fig. 1-5 armature iron slice Figure 1-6 DC motor commutator Figure 1-6 DC motor commutator The basic principle of 1.1.2 DC motor 1, the working principle of DC generator, the physical model of DC generator, the physical model of DC generator, N, S for ABCD is fixed on the stator poles, stator poles, and stator poles is fixed on the rotating magnetic coil cylinder, cylinder rotating magnetic coil, coil along with the magnetic cylinder called a rotor or motor armature. The first end of the coil is a and connected to the armature. The first end of the coil and the D are connected to two reversing plates which are insulated from each other and rotate along with the coil. On the reversing tab. The connection of the rotor coil with the external circuit is done by placing an immovable brush on the commutator plate. Moving with an electric brush. When the prime mover drives the motor rotor counter clockwise as shown on the right. After rotating 1800, as shown on the ri