蓄热(国外英语资料).docVIP

蓄热 Regenerative heating furnace is essentially a combination of high efficiency regenerative heat exchanger and conventional heating furnace. It is mainly composed of heating furnace, furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. Regenerator is the main heat recovery of flue gas in regenerative heating furnace It is the chamber space filled with regenerator, which is part of the flue gas and air flow passage. In a heating furnace, the regenerator is always used in pairs; a stove can be used with one pair or several pairs, or even dozens of pairs. In some large domestic heating furnace, the most used to 40. The advantage of regenerative waste heat recovery is that the temperature of the furnace is even. Because of the uniform temperature distribution, the heating quality has been greatly improved, and the product qualification rate has been greatly improved. A wider range of choices for fuel oil, heavy oil, natural gas, liquefied petroleum gas and other fuels, especially with preheat good low heat value blast furnace gas, gas, and expanded the range of application of fuel. As a result, the fuel consumption of the furnace is greatly reduced. For large heating furnace, it can save energy from 25% to 30%; for heat treatment furnace, it can save energy from 30% to 65%. The production of NOX by the traditional lower energy saving technology, combustion air preheating temperature is higher, the higher the concentration of NOX in flue gas; and the use of regenerative high temperature air combustion technology in the preheated air temperature up to 800 DEG C, NOX formation in furnace but greatly reduced. Because regenerative combustion is diffusion combustion in relative low oxygen state, there is no flame center, so there is not a large number of NOx conditions. The low content of NOx in flue gas is beneficial to protect environment. Another advantage of low oxygen combustion is that the burning loss of the heated metal can be redu