钢筋工程量计算规则(国外英语资料).doc

钢筋工程量计算规则 The rules of steel engineering calculation.Txt if I am poor enough to leave a bowl of rice, I will let you eat first, all the best things in the world should be mine, including you!! Can I say first love die? Come on, listen. Have the ability to take care of yourself, or honestly let me take care of you! This article is contributed by jdxyks DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Rules for calculation of reinforced engineering quantities (1) calculation rules for reinforcing steel quantities 1, reinforcing steel works should be distinguished from cast in place, prefabricated parts, different steel grades and specifications, multiplied by unit weight by design length, and calculated in tons. 2, the reinforcement quantity calculation, the design has been specified steel tower is connected to the length of the tower is connected in accordance with the provisions of length; design not specified tower connection length, has been included in the reinforcement of the loss rate, not the other tower connection length calculation. Reinforcement, electroslag pressure welding, sleeve extrusion and so on, in order to calculate. 3, pre tensioned prestressed reinforcement length is calculated according to the shape and the size of the component, post tensioned reinforced by prestressed reinforcement design provisions of the reserved channel length, and the difference between different types of anchorage, were calculated according to the following provisions: (1) low alloy steel with both ends of the screw anchor, prestressed steel bar according to the reserved hole length by 0.35m, the screw shall be calculated separately. (2) one end of the low alloy steel bar is inserted with an end plug, and the length of the prestressed steel bar is calculated according to the reserved hole length at the other end of the screw anchor, and the screw is calculated separatel