SMBJ6.0CA中文资料.docVIP

SMBJ5.0(C)A - SMBJ440(C)A 600W Surface Mount Transient Voltage Suppressor Features 600W Peak Pulse Power Dissipation 5.0V - 440V Standoff Voltages Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material - UL Flammability Classification Rating 94V-0 Mechanical Data Case: SMB, Transfer Molded Epoxy Terminals: Solderable per MIL-STD-202, Method 208 Polarity Indicator: Cathode Band (Note: Bi-directional devices have no polarity indicator.) Marking: Date Code and Marking Code See Page 2 Weight: 0.1 grams (approx.) MAXIMUM RATINGS Rating at Ta = 25 ?C ambient temperature unless otherwise specified. DO-214AA (SMB) 0.083(2.11) 0.155(3.94) 0.075(1.91) 0.130(3.30) 0.185(4.70) 0.160(4.06) 0.012(0.31) 0.006(0.15) 0.096(2.44) 0.083(2.13) 0.050(1.27) 0.008(0.203) 0.030(0.76) MAX. 0.220(5.59) 0.200(5.08) Dimensions in inches and (millimeters)  Rating Symbol Value Units Peak Pulse Power Dissipation on 10/1000ms (1) waveform (Notes 1, 2, Fig. 3) PPPM Minimum 600 Watts Peak Pulse Current on 10/1000ms waveform (Note 1, Fig. 5) IPPM See Table Amps Peak forward Surge Current 8.3 ms single half sine-wave superimposed on rated load ( JEDEC Method )(Notes 2, 3) Maximum Instantaneous Forward Voltage at 50A VFM See Note 3, 4 Volts Operating Junction and Storage Temperature Range TJ, TSTG - 65 to + 150 ?C Note : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 ?C per Fig. 1 (2) Mounted on 5.0mm2 (0.013mm thick) land areas. (3) Measured on 8.3ms. Single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum. SMBJ6.0CA  TYPE Marking  Reverse Breakdown Stand-Off Voltage Voltage Min. @IT  Breakdown Voltage Test Max. @ IT Current  Maximum Clamping  Voltage @IPP  Peak Reverse Pulse Leakage Current @VRMW (Uni) (BI) (Uni) (Bi) VRMW (V) VBR MIN(V) VBR MAX(V) IT (mA) VC(V) IPP(A) IR(uA) SMBJ5.0 SMBJ5.0C KD AD 5.0 6.40 7.55 10 9.6 62.