基于PLC的XA6132万能铣床电气控制.docVIP

摘 要 本论文是研究可编程控制器（plc）在XA6132万能铣床XA6132万能铣床XA6132万能铣床Abstract :This paper is to examine programmable controller (plc) XA6132 Universal Milling Machine transformation of technology should be with problems, plcs own characteristics resolve traditional relay - contactor electrical control system of complex circuits, Stability poor reliability, fault diagnosis and rule out other problems difficult. As the PLC control system and electrical relay - contactor electrical control systems, is simple in structure, programming convenience, Debugging a short cycle, high reliability and anti-jamming capability and a low failure rate, the work environment requires a series of low strengths. Thus, the thesis of the XA6132 Universal Milling Machine CNC transformation, PLC control technology will be applied to the transformation of the program, and thus greatly enhance the performance of Miller. Analysis of the paper machine control theory, developed a programmable controller XA6132 Universal Milling Machine electrical control system design, completed the electrical control system hardware and software design, including the choice of PLC Systems, I/O port allocation, I/O hardware wiring the drawing, PLC ladder logic program design. PLC control of the milling process were discussed in detail, This paper discusses the PLC to replace traditional relay - contactor electrical control system so as to enhance the performance of the machine, the corresponding control diagram. Keywords : PLC, milling, NC transformation, electrical control system 亲，由于某些原因，没有上传完整的毕业设计（完整的应包括毕业设计说明书、相关图纸CAD/PROE、中英文文献及翻译等），此文档也稍微删除了一部分内容（目录及某些关键内容）如需要的朋友，请联系我的QQ:2215891151，数万篇现成设计及另有的高端团队绝对可满足您的需要。 目 录 1 绪论.......................................................... 1.1 机床数控化改造是工艺设备更新的途径.......................... 1.2机床数控化改造的条件......................................... 1.3 国内外旧机床数控改造的实例.................................. 1.4 plc（可编程控制器）技术应用发展历程.......................... 2.XA6132型卧式万能铣床的基本结构和控制要求.................