商业办公楼电气设计.docVIP

西安建筑科技大学 本科毕业设计（论文） 题 目 万科青青家园9#楼 BIM电气设计 学生姓名 学 号 院（系） 信息与控制工程学院 专 业 建筑电气与智能化 指导教师 时 间 2016年6月15日 万科青青家园9#楼BIM电气设计 设计总说明 本工程为万科青青家园9#楼，主体为商业办公楼，占地面积1418.32㎡。地上共13层，一、二层为商铺，3层-13层为办公室。设计内容主要包括：低压配电系统，照明插座系统，防雷接地系统以及BIM电气设计综合管线碰撞检查。低压配电系统包含内容为设计出各个供电回路相应的配电箱及走线方式，计算出各回路的计算负荷，最后选择好各个回路所需的线缆型号和保护器件型号，满足正常生活和安全的需要。照明系统主要说明一般照明灯具及插座的选择，照度及照明负荷计算，应急照明的选择及安装等。采用利用系数法进行计算，计算出各个房间合适的灯具数量。防雷接地方面，通过计算，本工程按第三类防雷建筑做防雷设计，接地系统采用TN-S接地，部分位置做局部等电位连接。BIM电气设计方面包括了解BIM技术的发展及特点，利用REVIT软件进行建筑三维建模，管线三维建模以及三维管线碰撞检查。 关键词：供配电系统；照明系统；防雷接地；BIM Vanke Green Homes 9 # BIM Electrical Design Design Description This project is Vanke green home building # 9, the main commercial office building, covers an area 1418.32㎡. 13 on the ground floor, first and second floors of shops, 3 layers -13 layer office. Design elements include: low-voltage distribution systems, lighting socket systems, lightning protection and grounding systems and electrical design BIM integrated pipeline collision checking. Low-voltage distribution system includes content designed each power supply circuit corresponding distribution boxes and cabling mode, the calculation load is calculated for each loop, each loop and finally choosing the desired cable type and model protection devices to meet the normal life and security needs. Lighting systems mainly explained select general lighting fixtures and sockets, illumination and lighting load calculation, emergency lighting, etc. Selection and installation. Calculation, each room is calculated using the appropriate number of lamps utilization factor method. Lightning protection and grounding, through calculation of the project according to the third class of mine buildings do mine design, grounding system using TN-S ground, some locations do local equipotential connection. BIM electrical design aspects include understanding of BIM technology development and characteristics, the use of three-dimensional modeling software REVIT construction, pipeline three-di