10-ufsdump 步骤 恢复系统,带metadb(国外英语资料).docVIP

10-ufsdump 步骤 恢复系统,带metadb(国外英语资料) # dd if = /dev/rdsk/c0t0s2 of = /dev/rdsk/c0t1d0s2 The partition is the same, # prtvtoc/dev/RDSK/c1t0s2 file.tab # fmthard - s file. TAB/dev/RDSK/c1d0s2 Newfs/dev/RDSK/c1t0d0s0 The following is an example of copying the original disc c1t0d0s0 to the target disk c1t1d0s0 # CD / # mkdir/MNT # mount/dev/DSK/c1d0 / MNT # ufsdump 0f - /dev/dsk/c1t0d0s0 (CD/MNT). Ufsdump 0uf root.bak/dev/DSK/c2t11d0s0 Ufsrestore rf root. Bak Tape backups Ufsdump - 0uf/dev/RMT / 0n / Tar-cvf/dev/RMT / 0 / var Modify/MNT/etc/vfstab Umount/MNT Other partitions in turn after / usr/sbin/installboot/usr/platform/sun4v/lib/fs/ufs/bootblk/bootblk/dev/RDSK/c0t0d0s0 Switch off - - reboot! = = = = = = Use c1t0d0s0 start the machine Installboot to c1t1d0s0 first Then # mount/dev/DSK/c1d0 / MNT # drvconfig -r/MNT/devices - p/MNT/MNT/etc/path_to_inst # CD/devices - print | cpio-pduvm/MNT/devices # disks - r/MNT # devlinks - r/MNT # luxadm set_boot_dev/dev/dsk/c1d0s0 # CD / # umoun/MNT # init 0 Put c1t1d0 in position 0, boot For example, there are two things in the world Fiber optic hard drives use this CD/dev/DSK Ls - al Luxadm-v set_boot_dev/devices/pci @ 9600,000 / SUNW, QLC @ 2 / fp @ 0, 0 / disk @w500000e010a7ee61, 0: a sometimes V490112954-06-12 should be deleted before you can see the cdrom Tip - 38400/dev/cua/a Maybe you have know it, I hope it can give you a little of hint. If you have system with internal FC disk and use SDS or other tool to make The local mirror, when you enable MPXIO by edit/kernel/DRV/scsi_vhci Will assign new controller # to HBA and internal FC disk controller.this Will lead SDS can not mount/and reset again and again Problem is not seen at SCSI internal disk. I think it is normal. What we shall do is disable mpxio on internal FC For example, you shall edit/kernel/DRV/QLC Because it use ISP2200 as FC controller: Add one line if your local FC disk path is / pci @ 8600,000 / SUNW, QLC @ 4 / fp @ 0 / disk: Name = QLC parent = / pci @8600