Console端口(国外英语资料).doc

Console端口(国外英语资料) The technical network must fully understand the network equipment interface creation time: on Friday 22 June 2007 (Friday) at 08:40 | classification: network administrator Network device interface type (1) Introduction: with the development of the Internet bar industry, the network tube has been transformed from waiter to computer problem expert. There is no denying that Its a lot better than it used to be, but we need to make a real technical network Add the oil. For example, the idea of switches cant always be on the object of a LAN level, right? The types of data interfaces for various switches are constantly changing, and the switches are continuously enhanced, and the switch ports are updated and updated The various special device connection ports are constantly added (to the switch), which makes the interface type of the switch very rich. In order to fully get Aware of these interfaces, and in order to improve ourselves, we need to recognize them one by one. The rj-45 interface This interface is our most common network device interface now, commonly known as the crystal head, the technical term for the rj-45 connector, which belongs to the dual Type of winch Ethernet interface. The rj-45 plug can only be inserted in a fixed direction, with a plastic shrapnel and a rj-45 slot to prevent it from falling off. This interface can be used in 10base-t Ethernet, 100base-tx Ethernet, 1000base-tx Ethernet, and transmission media Double stranded wires, but depending on the bandwidth, there are different requirements for the media, especially at 1000base-tx gigabit Ethernet connections, at least With the super 5 line, you need to use the 6 lines for stable and high speed. SC fiber interface The SC fiber interface was applied in the 100base-tx Ethernet era, so it was called 100base-fx (F is a fibre-optic word) Fiber is short for fiber, but at the time, it was no more expensive than double stranded, so it was not popularized and now the industry is big To