JB4730与ASME比较(国外英语资料).docVIP

JB4730与ASME比较(国外英语资料) standardized JB4730 standard and ASME specifications The comparison of the ray The horse Xiao (nanhua chemical machinery plant, nanjing 210048) Abstract: the JB 4730-1994 standard and ASME specifications discuss some of the differences in the X-ray detection section, including testing Measurement, geometric inarticulation, penetration thickness, black degree, sensitivity and film rating. Keywords: radiographic examination; Specification; Standard; Boiler; The pressure vessel Middle image classification number: TG115.28 document identification code: B article number: 1000-6656 (2002) 11-0497-02 COMPARISON OF RADIOGRAPHIC TESTING REQUIREMENTS BETWEEN STANDARD JB4730AND ASME CODE MA Xiao (Chemical Industrial Machinery Works, Nanjing Chemical Industrial Co., Ltd, Nanjing 210048, China) Abstract: Some differences are discussed about standard JB 4730-1994 and ASME code in terms of radiographic testing, in - Cluding testing thewire, geometric unsharpness, radiographic thickness, density, sensitivity and qualities evaluation. Keywords: Radiographic testing; Code; Standard; Boiler; Pressure vessel The manufacture and inspection of boilers and pressure vessels involves a variety of rules Fei and standards. Currently, the most used foreign pressure vessel standard is American ASME specifications. The specification has a lot to do with the relevant standards in China With the point. This is the 1998 edition, the 2000 supplement and the 2001 ASME Standardize the fifth and eighth volumes of the [1] and the national pressure vessel All technical supervision procedures [2], GB 150 [3] and JB 4730 [4] are available Some of the requirements for screening are compared. 1 detection ratio Boiler and pressure vessel safety technical supervision procedures and GB 150 In the case of weld, different test proportions are provided, and the product nameplate The markings on the test scale, such as 100% and 20%, are required. ASME 8, volume 1, volume 1, UG116, specifies fo