n7k config(国外英语资料).doc

n7k config(国外英语资料) Empty configuration: wr erase Resume: reload Before entering the system, you will have to choose whether to activate the security password and the admin VDC Configure the hostname: hostname xx Configure the banner, the banner motd ^ See configuration: sh run/sh star Save configuration: copy run start View the file system: dir Check local log: dir log See external log: dir logflash: View the module status: sh module Configuration management address Int MGMT 0 IP add xx No shut Ping: ping xx VRF management Configure CDP: CDP enable (n2k does not support CDP) No redunancy: power redundancy - mode combined Grid redundancy: power redundancy - mode insrc - redu Ps redundancy: power redundancy - mode ps-redu Full redundancy (ps + grid) : power redundancy - mode redun Check the power: sh environ power The NTP configuration: Clock timezone 8 0 GMT The NTP server xx use - type VRF (variable refrigerant flowrate) management The NTP sou MGMT 0 Check the status of NTP: sh NTP peer - status Cisco fabric services is a cisco feature that distributes data including: Redius; Tacacs +; The user and administrator roles; Call home. The NTP Start the Telnet feature: feature Telnet Telnet test: Telnet xx VRF management The session manager feature allows you to apply configuration changes in batches as follows Config session (configure session) : create a desire to use a batch of commands in the session manager mode Validation (validation) : syntax detection, test failure nx-os returns a fault Verification: verify the configuration, detect failed nx-os and return an error Commit (commit) : nx-os saves and USES the configuration Abort: abort configuration modification Four VDC (2E engines support 8) One default VDC 3 no-default VDC or 1 admin VDC 4 no-default VDC 4 k vlans each VDC 256 type VRF (variable refrigerant flowrate) each VDC Up to 768 ports-channels are on physical devices, with up to two spans on a physical device The default VDC has a full function, and some t