Ros_Queue详解(国外英语资料).docVIP

Ros_Queue详解(国外英语资料) In ROS, the function of queue is primarily applied to the following functions: 1) limit the bandwidth of the IP addresses, subnets, protocols, ports, or other parameters of the Ming solution 2) restrict end-to-end transport 3) prioritize certain packet traffic 4) all users have equal access to Shared bandwidth Use a single QUEUE: Assume that the maximum rate of Internet access at 192.168.2.12 is 512K [admin @mikrotik] queue simple [admin @mikrotik] / queue simple add name = 12 target - Addresses = 192.168.2.12 Max - limit = 512,000/512,000 [admin @mikrotik] / queue simple print Flags: x-disabled, i-invalid, d-dynamic 0 name = 12 target - addresses = 192.168.2.12/32 DST - Address = 0.0.0.0/0 interface = all parent = none direction = both The priority = 8 queue = default - small/default - small limit - at = 0/0 Max - limit = 512,000/512,000 burst - limit = 0/0 burst - threshold = 0/0 Burst - time = 0s / 0s total - queue = default -small Assume that the nets 192.168.2.2 to 192.168.2.14, the internal network of the contiguous IP segment The total speed of the Internet [admin @mikrotik] / queue simple add name = queue1 target - Addresses = 192.168.2.0/28 Max - limit = 512,000/512,000 [admin @mikrotik] / queue simple print Flags: x-disabled, i-invalid, d-dynamic 0 name = queue1 target - addresses = 192.168.2.0/28 DST - Address = 0.0.0.0/0 Interface = all parent = none direction = both priority = 8 Queue = default - small/default - small limit - at = 0/0 Max Limit = 512000/512000 Burst - limit = 0/0 burst - = 0/0 burst - time = 0s / 0s Total - the queue = default - small Assuming the limit of 192.168.2.2, 192.168.23, 192.168.26, the three discontinuities The total traffic limit for Internet access is 512K: [admin @mikrotik] / queue simple [admin @mikrotik] / queue simple add name = queue2 target - Addresses = 192.168.2.2, 192.168.2.23, 192.168.2.26 Max Limit = 512000/512000 [admin @mikrotik] / queue simple print Flags: x-disabled, i-invalid, d-d