router(国外英语资料).docVIP

router(国外英语资料) Common operating items for switches Change the host name switch (config) # hostname sw1 Set the password to enter privileged mode The switch (config) # enable password 1234 The switch (config) # enable secret cisco 3, set the console password The switch (config) # line console 0 Switch (config-line) # password 123 The switch (config - line) # login Check the MAC address list, the switch# show mac-address - table Check the MAC address list refresh time: switch# show mac-address - table aging - time Change the MAC address list refresh time switch (config) # mac-address - table aging - time 200 View the current configuration (RAM) switch# show running - config Check the switch configuration (NVRAM) switch# show startup - config Save the configuration Switch# copy running - config startup - config Switch# write Restore factory default Settings Switch# erase startup - config Switch# reload Check the CDPs global information switch# show CDP View the interfaces CDP configuration information switch# show CDP interface f0/2 Check the statistics for the CDP package Check your neighbors information Review the details of all entry items Switch# show CDP neighbors detail Switch# show CDP entry * The description information switch (config-if) # description connection to routerA is added to the interface Set the switchs gateway switch (config) # IP default - gateway Turn off the DNS parsing switch (config) # no IP domaine-lookup Implement remote management of switches The switch (config) # enable secret cisco The switch (config) # intface valn 1 Switch (config-if) # IP address 00 The switch (config - if) # no shutdown Switch (config) # line vty 0 4 The switch (config - line) # password 123 The switch (config - line) # login C: \ Telnet 00 Password recovery for switches Remove the power of the switch Press the mode key to plug in the power, and when switch occurs, the hand is released Switch: flash_init / / load into flash Switch: dir flash: / / see the files in f