usbport.sys 蓝屏 修复+蓝屏代码分析(国外英语资料).doc

usbport.sys 蓝屏 修复+蓝屏代码分析(国外英语资料) Usbport.sys blue screen/fix 1, go to C: Windows system32 drives delete the usbehc.sys usbhub. Sys usbport.sys 2, get into the device manager and tear down all the USB drives. Enter C: Windows system32 delete usbui.dll Restart the computer! Note: this kind of problem is GHOST version of the systems installed in most of the customers, if according to the method could not be solved, is likely to be caused by the driver and video card driver has a conflict, suggest uninstall the graphics card driver and uninstall the USB drive in accordance with the above method. Windows system file error, reload driver can be fixed When the USB device is connected to the computer, the system immediately reads the relevant information about the access device and invokes the relevant driver. A blue screen failure occurs when the Windows system calls the wrong driver and causes the device to fail. You can go to the device manager, remove all the USB devices, and restart the computer, Let the system rescan and install a driver. Study on a recruit: Another approach is to go ahead and remove the Windows system32drives USBehci sys, Usbhub. Sys, Usbohci sys, Usbport. Sys These four files, delete all the USB drives, and finally Windows system32 The delete Usbui. DLL Then restart the computer. If you cant recover, try to redo the system, and its not possible to burn the USB port. A, 0 x0000000a; This blue screen code has nothing to do with hardware, is caused by drivers and software have a conflict, the earliest discovered this code because of companys DELL machine USB keyboard and qq keyboard encryption program have found that the problem of conflict. The driver error was also generated in the IBM T series notebook. If your machine is in the blue screen, and every time is this code, please think of what is recently updated the software or what drives, uninstall it and have a look. In general, you can solve it, if you cant think of it, and if its very freq