华为认证交换机试题XXX(国外英语资料).doc

华为认证交换机试题XXX(国外英语资料) Principle 1 switch 15. The following description of switches working right is (much) (ABD) A. you can work in half A duplex B. you can work in full duplex C. use full duplex for circuit and conflict detection D. use semi-duplex methods for loop and conflict detection 1) Ethernet is a concrete implementation of the (a) standard A. 802.3 B. 802.4 C. 802.5 D. 802. Z 2) a VLAN can be seen as a (b) A. collision domain B. broadcast domain C. management domain D. block domain 3) the device that can be used to segment the Ethernet network (ABC) A. the bridge B. switch C. the router D. a hub In Ethernet (ab), you can divide the network into multiple conflict domains, but you cant divide the network into multiple broadcast domains A. repeater A single VLAN switch C. the router D. a hub The following (b) device can be seen as a multi-port network bridge device A. repeater B. switch C. the router D. a hub Which forwarding method is delayed in Ethernet switches (b) A. full-duplex B. the Cut - through C. the Store - and - forward D. half duplex 7) what is true about Shared Ethernet is (ABC) A. conflict detection is required Only semi-duplex traffic control can be achieved C. use the CSMA/CD media access mechanism The switch knows how to forward the frame to which port (a) Use the MAC address list Use the ARP address list Read the source ARP address Read the source MAC address 9) in Ethernet, it is the (d) address that distinguishes different devices A. the IP address B. the IPX address C. LLC address D. the MAC address The following statement is false (a) A. bridge can isolate network layer broadcast The repeater is a device that works in the physical layer The router is the device that works on the network layer D. Ethernet switches work on the data link layer 11) the following statements about Ethernet switches are correct (a) An Ethernet switch can isolate the conflict domain The b.ethernet switch is a device that works on the network layer C. a single VLA