双路由器方法处理网通封闭(国外英语资料).docVIP

双路由器方法解决网通封锁(国外英语资料) The following analysis I try to introduce in plain, flowing and concise language, make sure that non-computer professionals can also read it. In theory and engineering, each network has the worlds only address, the MAC, which is a binary number of 48 bits. When we dialed the Internet through a router, the netcoms router would assign us a router with an IP address. In order for each packet to quickly find a computer that initiates data requests, the router tends to encapsulate the MAC into the packet. At this moment, netcom, through international network, trade winds type of scanning software, monitoring each IP address data request, once found a IP data request contains two or more MAC address, it will block the IP. How do you block IP? You cant block IP addresses first, because most users IP addresses are temporarily allocated; Second, cant block account, because once the blocked account, after an hour unblock is the technical difficulties, and netcom will also be at risk in violation of the agreement of the law. What exactly does netcom do? We found that even blocked the router, we still can on the qq, you can use to download emule exchanges sources, which means neither blockade IP netcom, also have no closed accounts, also not all block TCP/IP port. So, they can only block the port that the browser needs, blocking the DNS. Thats the crux of the problem. Netcom weighed costs and benefits, minimized the cost of the blockade and blocked most of the unknowledgeable users. Companies are always maximizing the benefits, and blocking out blocks is only a means of doing things that they cant do without cost. By upgrading the router firmware, avoid blockade, principle is router changed the way of packaging, shielding the MAC information in the packet, for the wide area network, see is the routers MAC. This is the perfect way to do it. However, as mentioned above, not every router can find firmware that can escape the blockade. In fact, routers are alr