土工类专业试题(国外英语资料).doc

土工类专业试题(国外英语资料) Geotechnical class A, fills up the topic 1. (drying) is a standard method for determination of water content of soil, for fine grained soils Shall not be less than (8) hours, such as for sand soils, shall not be less than (6) hours of containing organic matter more than 5% of T soil, temperature control shall be under the constant temperature (65-70 ℃). The non-uniform coefficient of soil is reflected (the distribution of soil particles). The curvature coefficient Cc describes (the distribution of soil particles) Soil is composed of the following three parts (solid phase), (liquid phase) and (gas phase). 4. The commonly used method for determination of soil density has a knife method (ring), (sand filling method) and method (wax) and method (irrigation), etc. The plasticity index of earth is the difference between the liquid limit and the plastic limit of the earth, and the greater the IP, the higher the plasticity of the soil. 6. The soil compaction test purpose is to obtain maximum dry density and best water content (), small canister is suitable for the soil particle size is not more than (25 mm); The large test tube USES no more than (38) mm of earth. 7. Soil compaction test, test tube humidification soil quality 3426.7 g, 1214 g, test tube quality test cylinder volume 997 cubic centimeter, 16.7% soil sample water content, the soil dry density is 1.90 (take two decimal Numbers) The three components of earth Answer: the three constituent substances of earth: granule (solid phase), water (liquid phase), gas (gas phase) Water exists in all three states in the earthwork A: solid, liquid, gas Soil may be composed of phase two bodies Physical properties of earth: Answer: (1) density, soil density, dry density, soil moisture content, saturation density, floating density, pore ratio, porosity, saturation (2) the calculation of the porosity A: n = v. v. / V The water content in the water content test refers to what water, including which two kinds of wate