很好的制作PE的新手教程(国外英语资料).docVIP

很好的制作PE的新手教程(国外英语资料) The winpe.ini call process Winpe.ini is specified by the PE system SYSTEM32 \ PECONFIG. The process time delay = 10 External configuration file = external program \ winpe.ini Edit the PE registry Run regedit. Exe, the cursor to the HKEY_USERS or HKEY_LOCAL_MACHINE item, and then - loading configuration unit - select the registry file setupreg. HIV - literally a name such as PE - change - the cursor PE file - unloading preparation unit. The representation of the disk partition in menu.1 HDX, y X represents the number of disks, starting at 0 The y represents the number of partitions, starting at 0, the primary partition USES 0, 1, 2, and 3, so the logical partition starts at 4 The PELDR cross-partition load file / rdpath = multi (0) disk (0) rdisk (0) partition (2) \ XPE. IMG The use of the 5, grubinst_gui 1, download grubinst 2, double-click the grubinst_gui. Exe 3, in the disk right list need to install the Grub4Dos hard disk/floppy disk, if you have multiple disks (including USB mobile hard disk), please pay attention to the disk size shown in [], in order to select the correct disk. 4, if need to install the partition, can right click on the partition list of the refresh button, and then the need from the drop-down list to select the district (FAT12 / FAT16, FAT32 / however/EXT3). This step is omitted if you need to install the MBR. If you want to recover the original MBR/BS in the future, enter the file name for the saved file in the save file. 6, click install, appear command window, if see The MBR/BS has been successfully installer, The installation is successful. Of course, the above steps are just to install the startup code, and to start Grub4Dos normally, you need the following steps: Download the latest version of Grub4Dos. Find the GRLDR in the compressed package and place it in the root directory of the FAT16 / FAT32 partition. Edit the menu.lst file (which should be in the same directory as the GRLDR) to configure the boot menu. Wit