慢走丝工作(国外英语资料).docVIP

慢走丝工作(国外英语资料) Wire walking to work Plastic mold: inserts, slanting roofs, front and back molds, bronze males. KP: punch, B1, A1. Hardware: punch, edge, forming, 106, 105, 103. Machine tools: no. 9, 10, 11, 12 machine tools with 0. 25 copper wire, other 0. 20 copper wire. Resin: a machine has two cans, one and a half, and three bags for 30 to 40 days. A: 30 to 40 days or so. One machine has four. Copper wire: a coil of copper wire is used for two days and two nights, a week to bring about twice, 0. 25 to bring 3 cases, 0. Four cases, one coil of copper wire, 5KG, and a box of 20KG. Description of each discharge parameter SNO: cutting discharge condition of serial number \ VO: discharge voltage, large - fast, small, slow, commonly used by 60-150 - v \ VG: gap voltage, small speed - clean, smooth slow - good, commonly used by 35-50 v \ SG: servo sensitivity, servo control parameter, workpiece thin big - fast food fast - unstable, workpiece thickness small - slow - a stable, commonly used by 5-20 \ CS: choosing rough machining or finish machining, cutting current DC power set, 0 and coarse current, current in 10 -, 20 - to 24 - current AC power set, 101102 - coarse current, current, in 110-120-124 - current, 30-33 - high frequency current young \ I: cutting current, grade 1-15 \ OFF discharge OFF time, commonly used by 10 to 30 \ HS high-speed function, fast, slow, often go from 1-31 \ WS linear velocity, 1-99 \ WT line tension, 1-99 \ FL high pressure jet flow, fine water 7, 111-117, the floods 7, 121-127, a total of ten level 4 \ S/F/constant speed automatically select, 0 - automatic, 1 - constant speed constant speed processing speed \ N \ F effective discharge rate, 68 -, 40 -, young, 0 and high frequency. Search and discharge conditions in the system Select the system in the conditional menu, and the cut condition/system screen will be displayed In the system to find the best cutting conditions search sequence is as follows (1) material (2) thickness of wire diamet