手机连笔记本上网(国外英语资料).docVIP

手机连笔记本上网(国外英语资料) A hardware connection In general, there are three ways to connect a phone and a laptop, in turn to connect to a data line, an infrared connection, and a bluetooth connection. Connect the data line Step one: the phone will be connected to the usb port of the laptop via a cable, and the phone will be prompted for a different message. Stored in sequence (i.e., mobile phone as a storage device, the name may be different, that mean the same) and sequence interface (namely as the communication interface, also known as a serial port, the name may be different, this is the meaning of) is all phones. After the connection of the data line, select the sequence interface, the first selection of the sequence interface will show the prompt for new hardware, and the driver will be installed. Step 2: domestic mobile phone driver can go to the Internet, some other mobile phone under the corresponding can online after installation of a good driver, a port will appear in the device manager (e.g., COM3), which suggests the driver installation is complete. For example, the home-made phone that I downloaded had to select 2K_XP_COM in the driver to be installed successfully. Step 3: set the phone to modem, first find a modem Settings in the control panel, add a modem, manually choose modems and port, generally choose standard 9600 BPS modem, the next step and select ports (COM3 installed above), so that you can install modems. Here especially emphasize that need to be installed in the modem properties, select advanced input command to initialize: AT + CGDCONT = 1, IP, cmwap. Its meaning is locked with a wap web site, if there is an error 743, most likely is not initialized. Tips: The laptop is an XP system, and the system is automatically recognized for most phone models when we use the computer When the phone is connected to the Internet, the phone actually ACTS as a modem role and the laptop will dial up the information Send it to the phone, and then dial the phone for