拔号连接不上的几种原因(国外英语资料).docVIP

拔号连接不上的几种原因(国外英语资料) There are several reasons for the dialing: Ror 602 The port is already open Problem: the dial-up network network cannot be connected because of the device installation error or is being used Why: RasPPPoE is not fully and properly installed Solution: uninstall any PPPoE software and reinstall it Error 605 Cannot set port information Problem: dial-up network network because device installation error cannot set the usage port Why: RasPPPoE is not fully and properly installed Solution: uninstall any PPPoE software and reinstall it Error 606 The port is not connected Problem: the dial-up network cannot connect to the required device port Reason: RasPPPoE does not have complete and proper installation, connection failure, and ADSL MODEM failure Solution: uninstall any PPPoE software, reinstall, check line and ADSL MODEM Error 608 The device does not exist Problem: the device for the dial-up network connection does not exist Why: RasPPPoE is not fully and properly installed Solution: uninstall any PPPoE software and reinstall it Error 609 The device type does not exist Problem: the type of device that is connected to the dial-up network is uncertain Why: RasPPPoE is not fully and properly installed Solution: uninstall any PPPoE software and reinstall it 6, Error 611 The route is not available / 612 The route is not Problem: dial-up network connection routing is not correct Reason: the RasPPPoE is not fully and properly installed, and the ISP server fails Solution: uninstall any PPPoE software, reinstall, and call your ISP Error 617 The port or device is already disconnecting Problem: the device for the dial-up network connection is disconnected Reason: RasPPPoE does not have complete and proper installation, ISP server failure, connection line, ADSL MODEM failure Solution: uninstall any PPPoE software, reinstall, call isps, check the offline and ADSL modems 8, the Error 619 Problem: no connection can be established with an ISP server Reason: ADSL ISP