旋涡气泵(国外英语资料).docVIP

旋涡气泵(国外英语资料) Vortex air pump, vortex pump, vortex high pressure pump and vortex pump, vortex high-pressure blower, vacuum pump, high pressure spiral vortex pump pump selection, 152, 1675, 0350 Summary: the impeller of a spiral air pump consists of a number of blades, which are similar to a large turbine impeller. Impeller blade in the middle of the air by the effect of the centrifugal force, to the edge of the impeller motion, where the air into the pump body cavity ring and unconstrained style, from the starting point of blade cycle in the same way again. The circulating air generated by the rotation of the impeller is used by the high energy of the air pump. Air pump adopts special Taiwan motor, compact structure, small volume, light weight, low noise, and no oil without water. Vortex pump suction double blowing function, with vacuum and pressure two functions, USES the German gauri technology, no water and oil by gas, low noise, high efficiency, free maintenance, high performance and other characteristics; Power range: 0.25 ~ 25KW; Air flow: 80m3 / h ~ 2050m3 / h; Compression capacity: 1000mmH2O. Vacuum adsorption capacity: 1000mmH2O ~ 4500mmH2O, special blade design, high pressure, high air volume, low noise, long life. Air volume control is stable and easy to operate. The style is complete. Insulation performance is strong, easy to install, high reliability, high compression ratio, the bearing operating temperature is low, no oil pollution, easy maintenance, beautiful appearance, and the highest quality. The generation of high pressure and high suction is unique impeller design. Vortex pump impeller with multiple edges, when the impeller rotates, due to centrifugal effect, the air in the two blades is rapidly to the outer edge direction, mass transfer, energy of wind pressure was quickly overlay, formed high pressure or high strength increases its speed. Once the air has been reimported into the impeller, it will be accelerated again. The wind pressure is quick