常用发黑方法(国外英语资料).docVIP

常用发黑方法(国外英语资料) Black process writer: syangs submission date: 2007-1-4 11:00 | classification: | traffic: 912 This invention mainly involves a kind of normal temperature black processing technology, which is mainly composed of the following process: 1) cleaning; 2) degreasing: the workpiece must be fully immersed in the degreasing fluid; The concentration ph of the degreasing liquid is 12 to 14, processing time 10-30min, and jitter for 3 to 5 minutes, the concentration of liquid is lower than ph12. 3) water; 4) pickling: the ph of the acid bath is 2-4, processing time 5-10min; 5) water; 6) black: the liquid concentration ph 2.5 to 3.5, processing time 10-12min; 7) washed; 8) dry; 9) oil. The beneficial effect of this invention is: 1. Black and black are not electrically powered. Increase productivity: 1 to 2 minutes in total. Low black cost, simple equipment and easy operation. The black time was strictly controlled. The process is adaptable: Black technology of metallic materials The surface of the steel parts is black and is also called bluish. The traditional methods of black and black processing are traditional alkaline heating and black, and they appear late in the night. But it is not very good for low carbon steel. A3 steel is black better with alkalinity. The basic black is broken down, and there is a black and black difference. The main ingredients of the black liquid are sodium hydroxide and sodium nitrite. The temperature at which the temperature is required is large, and it can be found between 135 degrees Celsius and 155 degrees Celsius, only for a certain amount of time. In practice, it is important to be aware of the removal of rust and the quality of the oil and the passivation of the oil. The quality of hair and black quality is often changed by these processes. The metallic blue liquid Using basic oxidation or acidic oxidation; The process of forming an oxide film on the surface of the metal to prevent corrosion of the metal surface is called bluing