服务器客户机缓存设置(国外英语资料).docVIP

服务器客户机缓存设置(国外英语资料) The 7.0 service/client cache correlation set - the web site dunwave original The 7.0 service side tweaks the disk caching technique, further improving the algorithm for optimizing the cache. NxD? There is a rule in 5.8 that USES dynamic memory ( = 1G, which is recommended for the cache start partition); NxD? 7.0 removes the 1G limit, and you can set up large enough caches within the range of physical memory. The server for the whole disk cache size is increased by 2 to 4 g (such as setting the disk cache) can greatly reduce the server load, often appear some 100% CPU utilization of the server through this setting can greatly reduce the CPU utilization. (cache the image can effectively reduce the load on the server, but if and express when used at the same time, likely because of the cache in the updated game fail to appear on the client machine.) Server-side disk cache: the dynamic cache mode that is not restricted to 1G, and the previous static cache. The server memory is available When debugging a disk cache, the cache scope refers to the scope of the caches scope for disk action, which is beyond the cache scope The disk reads will not be cached and will read the disk directly. Boot partition: under the condition of the physical disk has multiple partitions can be set only cache boot partition. (this cache is turned on to the client has a lot to improve startup time) Entire disk: cache the entire disk. The hit ratio is slightly lower. (this cache opens up to a large increase in the overall speed of the client) Life rate: when the workstation accesses the accelerator node, it is called when the node has cached data to be accessed To make a hit, if there is no need to go back to the original server, there is no hit. Maximum concurrency control: a tight connection with the server-side cache if you are running a server-side cache, select the concurrency number control (default automatic) The system automatically controls the system at 10-30% or mor