木材表面处理(国外英语资料).docVIP

木材表面处理(国外英语资料) Surface treatment of BBS: http://252/forum-117-1.html Wood oil wax A mixture of varnish and paint The hardness of wood wax is too low. Im not studying chemistry. I graduated from civil engineering, so its hard to analyze it in chemistry. I tried wood wax. Look: the difference between polyester and nitrocellulose is still big. This property owner can apply, real wood furniture luster is best to adjust to 5 cent light, big treasure paint, 3-4 cent light is appropriate. As for why real wood furniture is the best, Im in the next piece of furniture: McDonalds and heng jian: how long can you sit? Will be mentioned in subject a little grandstanding, mainly starts with the comfort that occupy the home, in colour, gloss, ergonomics analysis, why McDonalds chair, the music, the color is not suitable for sedentary, and design and production of solid wood furniture to how to avoid these problems. Hardness: the best way to demonstrate this is to use facts. I once told an owner that red oak is much harder than the water, and the rubber wood is harder than the water, and the owner thinks I am the king. I went straight for the red oak and the water, and the wood and the water. In the same way, I should judge the hardness of wood wax and polyester lacquer and nitrocellulose lacquer, the best way is to break each other, who is shallow, whose hardness is high. The results of the experiment were clear in the performance gap. You can use your fingernails on wood wax paint to see if there is any. If this is not satisfactory, at least the furniture of table, chair, sofa, desk is not suitable for use wood wax oil. Environmental protection: current polyester lacquer and nitrocellulose paint harmful material are unavoidable. But the polyester lacquer is a bit better than nitrocellulose lacquer, because can become lacquer film, wait to taste finish good, can meet requirement commonly. The professional furniture paints of huarun, jialili and daobao can meet environmental require