印刷机套准系统耦合建模与控制器设计.PDF

包 装 工 程 第38 卷 第 5 期 ·222 · PACKAGING ENGINEERING 2017 年3 月 印刷机套准系统耦合建模与控制器设计 李健 1 ，刘善慧 2 （1.河南科技大学，洛阳 471003 ；2.西安理工大学，西安 710048 ） 摘要：目的 研究印刷机套准系统耦合建模及精密控制策略以减小套准误差。方法 根据印刷机套准系统 工作机理建立多色套准系统的非线性耦合数学模型，并进行线性化改造，在所建立数学模型基础上设计 基于PID 的前馈套准误差控制策略，并将该策略控制效果与传统PID 控制效果进行仿真对比。结果 在 张力干扰下，套准误差由±20 μm 减小到±0.8 μm ；速度波动下，套准误差由±30 μm 减小到±1.5 μm 。结 论 PID 前馈控制策略能够显著减小套准误差，提高套准控制的精度。 关键词：套准系统；套准控制；前馈；PID 中图分类号：TS803.6 文献标识码：A 文章编号： 1001-3563(2017)05-0222-06 Coupling Modelling and Controller Design for Register System of Printing Press 1 2 LI Jian , LIU Shan-hui (1.Henan University of Science and Technology, Luoyang 471003, China; 2.Xian University of Technology, Xian 710048, China) ABSTRACT: The work aims to research the coupling modeling and precision control strategy for register system of printing press, so as to reduce register errors. The nonlinear coupling mathematical model of multi-color register system was established according to the register system’s working principle, and the linear transformation was carried out. Based on the linear model, a PID-based feedforward register error control strategy was designed, and the control effect was compared with that of the traditional PID control. Results showed that the register error caused by tension disturbance was reduced from ±20 μm to ±0.8 μm, and the register error caused by velocity disturbance was reduced from ±30 μm to ±1.5 μm. It is concluded that the feedforward PID control strategy can significantly red