用c#操作txt文本文件的方法(国外英语资料).docVIP

用c#操作txt文本文件的方法(国外英语资料) How to read the text file contents: In the program described in this article, the read text file is displayed using a richTextBox component. To read the text file, you must use the StreamReader class, which is defined in the namespace system.io. By using the ReadLine () method of the StreamReader class, you can read the data that opens the current row of the data stream. The code implementation below reads C: \ file.txt and is displayed in the richTextBox1 component: FileStream fs = new FileStream ( C: \ \ file.txt , filemode.open, fileaccess.read); StreamReader m_streamReader = new StreamReader (fs); / / use the StreamReader class to read the file M_streamream. Seek (0, SeekOrigin. Begin) / / read each row from the data stream, until the last line of the file, and display the content in richTextBox1 This. Richtextbox1.text = ; String strLine = m_streamread.readline (). While (strLine! = null) { This.richtextbox1.text + = strLine + \ n; StrLine = m_streamread.readline (); } / / close the StreamReader object M_streamReader. How to change the data content in a text file: In this program, change the text file data content of the function is implemented by changing the contents of the richTextBox1, when the content of richTextBox1 this change, press the save as, brought in richTextBox1 content stored in the specified text file. To change the content of the text file, use the StreamWriter class, which, like StreamReader, is defined by the system.io namespace. By using the Write () method of the StreamWriter class, you can easily implement changes in the content of a text file. The function of the following code is: if the C exist file. TXT, put the contents of the richTextBox1 written to file. TXT, if not, create this file, and then write the text data. / / create a file stream to write or create a StreamWriter FileStream fs = new FileStream ( C \ \ file.txt , filemode.openorcreate, fileaccess.write); StreamWriter m_streamWriter = new StreamWriter