有线电视(国外英语资料).docVIP

有线电视(国外英语资料) [reproduced] the design of the residential complex cable TV system (2010-12-2910:44:06) is reproduced youxiandianshi The design of the cable TV system in the residential community: wayven An overview of the CATV system design solution The cable television system USES frequency transmission, adopts adjacent channel frequency transmission system, large capacity, high stability, small nonlinear distortion front-end system mainly include all kinds of receiving antenna, modulator, demodulator, multi-channel rf signal mixer. Currently, cable TV transmission media in China mainly has cable transmission, optical fiber transmission and microwave transmission, and the cable TV system USES optical fiber transmission. Cable distribution system is through the distribution network (, splitter, user distribution amplifier and a radio frequency cable) to the system of each user terminal to provide a proper TV signal system. This system adopts the distribution - branch forms from the user distribution amplifier output signal through a distributor first into a few road, each with different branches all the way up to the end user to provide conform to the requirements of the signal. During the summer, the weather anomaly is the peak season for cable TV systems failure due to more thunderstorms. The harm of lightning to cable TV system is very strong, so the lightning protection, lightning protection and grounding problem, became a cable TV system design important problems that cannot be ignored. The system has some instructions on how to do the related network. Two. Front-end system equipment and design The front-end system, the beginning of cable transmission, is the most important part of the cable system, the heart of the cable system. The quality of the front-end signal has a direct effect on the users signal. The front end USES adjacent frequency transport, and the front-end design configuration diagram is shown below. Primary in the front-end device The front-end eq