电机保养以及维修知识大全(国外英语资料).docVIP

电机保养以及维修知识大全(国外英语资料) What is an electric machine? A: motor is a component that converts battery power into mechanical energy, which drives the wheel of an electric car. What is a stator? Answer: the part that does not turn when working with brush or brushless motor. The motor shaft of a hub type with brush or brushless motor is called stator, which can be called internal stator motor. What is a rotor? Answer: the part that turns when working with brush or brushless motor. The shell of a hub or no brush motor is called a rotor, which can be called an outer rotor machine. What is a carbon brush? A: there are motor inside the roof on the surface of phase switcher, motor rotation, send electricity through phase switcher to coil, due to its main component is carbon, known as the carbon brush, it is easy to wear. The replacement should be maintained regularly and cleaned up. What is a brush holder? Answer: in the machine that has brush motor inside to be dressed up and keep carbon brush position. What is a phase changer? A: there are brush motor, with mutual insulating strips of metal surface, along with the motor rotor turns, alternating strips of metal contact brush is negative, realize the positive and negative variations of motor coil current direction, complete with brush commutation of the motor coil. What is the phase sequence? Answer: no brush motor coil in order. What is a magnetic steel? A: it is commonly used to refer to magnetic materials with high magnetic field strength. What is a brush motor? Answer: the machine is working, coil and the commutator rotating, magnetic steel and carbon brush dont turn, is the direction of the coil current changes * with motor rotation phase switcher and brush. In the electric car industry, there is a brush motor with the brush motor and low speed brushmotor. There is a lot of difference between a brush motor and a brushless motor, which can be seen in the name of a brush motor with a carbon brush, a brushless motor without a c