汇编语言与微机原理(国外英语资料).docVIP

汇编语言与微机原理(国外英语资料) Examination paper codename: computer composition principle and assembly language comprehensive practice A, fills up the topic 1. According to a numerical data is the basic elements of,,,. 2. 8 bit binary complement to decimal integer range is to say, the former twos complement representation The latters binary complement is expressed as. 3. A machine fixed integer format word length 8 bits (including one sign bit), expressed in binary minimum negative radix-minus-one complement for maximum radix-minus-one complement as a positive number. In terms of the number of representations, floating-point ratio points. In operational rules, floating-point ratio points. In operational accuracy, floating-point ratio points. 5. Floating-point representation, the range of data is determined by the data bits, the number of precision by the decision. The ASCII codes for 0 and 9 are 0110000 and 0111001 respectively, and the ASCII code for 3 is 5 ASCII It is. 7. Known character A ASCII code is 1000001, the ASCII character B as, ASCII for D of characters. 8421 yards for 15. 9. Each instruction is composed of two parts, namely, part and part. There is a machine word 16, with the operating code in 4. If a three-address address is used, each address bit is bit, which can be addressed directly Bytes; If a single address address is used, each address bit is bit, and the addressable space is byte. 11. Zero address instruction is not to bring a machine instructions, is by providing its operands. 12. The storage stack, need a, use it to indicate the change. The main function of the arithmetic is to proceed. SN74181 ALU is a bit operation unit, which consists of 16 bits of ALU with a piece of SNN74182, which is intended for implementation Parallel operation. In a microprogram controller, microoperations are the most basic operation of the control implementation. A machine instruction is interpreted by several constituent microprograms. 16. Microprogram sequential control of co