硬盘技术：磁道,扇区,柱面和磁头数(国外英语资料).docVIP

硬盘技术：磁道,扇区,柱面和磁头数(国外英语资料) Sector S) relative sectors number RS is: RS is equal to NH times the NH times the NH times the NH of C minus DDH plus S minus DS. If we know RS, DC, DH, DS, NS and NH S is equal to (RS MOD NS) plus DS And then H is the MOD NH So its going to be (r) ((RS DIV NS) DIV NH) + DC Key points: (1) the physical disk address is referred to as an absolute sector in the column/head/sector (2) a single digit represents a relative sector or DOS sector, or logical sector number (3) the conversion formula for the relative sector and the absolute sector The partitioning of the DOS disk area A formatted hard disk, the disk according to the role of the recorded data can be divided into different Main Boot Record (MBR: Main Boot Record), Dos Boot Record (DBR: Dos Boot Record), File allocation Table (FAT: File Assign Table), the root Directory (BD: Boot Directory) and data area. The first five important information is on the outer track of the disk, because the perimeter of the outer ring is always greater than the inner circumference, i.e. the outer ring storage density is smaller and the reliability is higher. Key points: (1) the entire hard disk can be divided into MBR, DBR, FAT, BD, and data area. (2) MBR, DBR, FAT, and BD are located on the outside of the disk. 5. The MBR The MBR is located in the first physical sector of the hard disk (absolute sector) column 0, head 0, sector 1. Since DOS is the first of the magnetic head 1 and sector 1, the MBR does not belong to the DOS sector, and DOS cannot be accessed directly. The MBR contains the primary boot program and the disk partition table for the hard disk. The partition table has four partition records. A recording area is a table that records the partition information. It is stored continuously from the main boot record offset address 01BEH, each of which has 16 bytes. The format of the partitioned table The offset of the partition table item takes up bytes 00 boot indicator 1B The magnetic head number 1