网线的接法：568A和568B线序详解(国外英语资料).docVIP

网线的接法：568A和568B线序详解(国外英语资料) The connection of the wire line: 568A and 568B sequence details Shenzhen computer accessories wholesale network / 2009-07-30 568A: white green | green | white orange | blue | orange | white and | brown 568B: white orange | orange |, | blue |, white blue |, green | white, | brown Line: used for interconnection between different devices (switches - PCS) 568 b - 568 - b Antiline: for interconnection between the same device (pc-pc, switch - switch) 568 a - 568 - b * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * a 568A is in line order from left to right: white green, green, white orange, blue, white blue, orange, white brown, brown. 568B is: white orange, orange, white green, blue, white blue, green, white brown, brown. The cross line is the 568A standard at one end and the 5568b standard double stranded at the other end. A straight line refers to a double stranded line of 568A or both. By the way, a lot of friends do RJ45, just to make sure that the order in the end of the line is the same, but it doesnt follow the 568A / 568B line. This can be connected to the network, but the resistance of this line is very poor, and often occurs when the network is slow and the network is bad. Hope everyone when doing the cable must be in accordance with the standard, and according to the practical engineering experience cable length is not less than 1.5 meters, best this to improve the stability of the network is very necessary! Lets take a look at how to choose straight lines and double stranded wires. When the following devices are connected, use a direct line: Connect the switch or HUB to the router; Computers (including servers and workstations) are connected to switches or hubs. When these devices are connected, they need to be crossed: Connect with the switch between the switch and the switch. HUB and switch connection; The HUB is connected to the HUB; The two PCS are direc