设备管理(国外英语资料).docVIP

设备管理(国外英语资料)pendingThere are three big questions in the paper. Thirty-one questions, a total of 46pending(16 points, 16 points in total)1, (1) direct memory access (DMA) approach is often used for data communication between computers and ().(A) character equipment(B) block equipment(C) exclusive equipment(D) Shared equipmentThe (1) I/O channels are usually used for () systems.(A) the microcomputer(B) embedded(C) large computers(D) all of these(1) I/O equipment is ().(A) directly connected to the CPU(B) directly connected to the computers system bus(C) the device controller is connected to the computer by the device controller(D) directly connected to the computers memory(1) the advantage of using interrupt control I/O is ().(A) can increase I/O speed(B) the CPU utilization is high enough to increase the parallelism of CPU and device operations(C) its easy(D) all of theseThe advantage of using a program to directly control I/O is ().(A) the CPU is more efficient(B) the CPU and equipment can work in parallelThe (C) method is simple and easy(D) all of these(1) I/O equipment can be controlled by ().(A) program control(B) interrupt control mode(C) the DMA(D) all of these(1) the purpose of a device driver is ().(A) controls the I/O operations of A particular device(B) provide an I/O program interface for the user(C) maps the logical devices used by the user program to physical devices(D) all of theseThe use of (1) device independent software is ().(A) controls the I/O operations of A particular device(B) provide an I/O program interface for the user(C) maps the logical devices used by user software to physical devices(D) all of these(1) the use of SPOOLing technology for virtual appliances is ().(A) turn the exclusive equipment into A Shared device(B) turn the sharing equipment into an exclusive device(C) turn the input equipment into an output device(D) the output device is transformed into an input device(1) the data structure required for the allocation of equipment is