供应除氧设备专用的优质海绵铁除氧剂滤料(外国英语资料).docVIP

供应除氧设备专用的优质海绵铁除氧剂滤料 Water for industrial cooling water, water for oilfield use and so on to remove dissolved oxygen in water. The consumption of sponge iron is very low, according to the different water quality and water treatment, generally 3--6 months added once; because of the water to soften the deoxidant surface passivation, the oxidation rate, and effect of oxygen effect, so it should be softened to oxygen. After a period of time, should carry out the washing; the amount of sponge iron is more than 97%, used in powder metallurgy field, the shape of a block and powder (a reduction of iron), such as deep processing can also be used as a two reduction of iron, the iron content will reach more than 99%, the price is higher; sponge iron (sponge iron filter) is refined iron ore powder in the furnace after the low temperature reduction of low carbon porous ferrite formed, its chemical stability, sulfur, phosphorus and other impurities with low content of iron and steel industry, it is used to replace scrap as senior charge for special steel smelting and top steel. After two reduction, it can be used for powder metallurgy, and the price is relatively cheap. In recent years, sponge iron is used in boiler water circulating water deaerator deaerator instead of a few years ago steel chip developed, because of its good deoxidizing effect, less investment, tons of water and low processing cost, simple maintenance is more and more used; sponge iron has strong reduction activity and surface area, as water deoxidizer sponge size for 2-5mm, high porosity, high activity and large surface area, easy to react with the oxygen in the water to generate Fe3o3, so as to achieve the purpose of oxygen, the reaction product is not easily soluble in water floc, was stopped, with a certain intensity of backwashing water can rinse clean. Sponge iron filter commonly used specifications: 1--3mm, 3--5mm, 5--8mm (special specifications can be processed as needed). The physicochemical index of sp