齿轮传动设计文件(外国英文资料).doc

齿轮传动设计文件(国外英文资料) Involute cylindrical gear transmission design report Design information Designer Name = zhujiacheng Design unit Comp = hefei university of technology Date of design Date = 2010-6-14 Design Time = 18:37:55 Design parameters Transfer power P = 16.20 (kW) T = 105.95 (N dot m) Gear 1 RPM = 1460 (r/min) Gear 2 speed n2 = 50.79 (r/min) The transmission ratio is 28.745 The original motive load characteristic SF = slight vibration Working machine load characteristic WF = uniform and smooth Expected lifetime H = 10000 (hour) Arrangement and structure Structure form ConS = closed Gear 1 arrangement form ConS1 = asymmetric arrangement (the shaft is large) Gear 2 arrangement form ConS2 = symmetrical arrangement Material and heat treatment The tooth surface meshes type GFace = soft tooth surface Heat treatment quality level Q = ML Gear 1 material and heat treatment Met1 = 34CrNi3Mo The range HBSP1 = 269 ~ 341 Gear 1 hardness HBS1 = 305 Gear 1 material category MetN1 = 0 Category 1 limit stress category MetType1 = 5 Gear 2 material and heat treatment Met2 = 45 positive fire Gear 2 hardness values range HBSP2 = 162 ~ 217 Gear 2 hardness HBS2 = 190 Gear 2 material category MetN2 = 0 Gear 2 limit stress category MetType2 = 7 5, gear accuracy Precision gear 1 first Ⅰ group JD11 = 8 Precision gear 1 first Ⅱ group JD12 = 7 Precision gear 1 first Ⅲ group JD13 = 7 The gear has a thickness deviation of 1 tooth The gear has a thickness of 1 tooth Precision gear group 2 first Ⅰ JD21 = 8 Precision gear group 2 first Ⅱ JD22 = 7 Precision gear group 2 first Ⅲ JD23 = 7 The gear has a thickness deviation of 2 teeth The gear has a thickness of 2 teeth The basic gear parameters of the gear Module n = 3 (mm) The end modulus Mt = 3.00000 (mm) Spiral Angle beta = 0.000000 (degree) The cylindrical spiral Angle beta b = 0.0000000 1 tooth number Z1 = 19 The gear 1 variable coefficient X1 = 0.00 1 tooth width B1 = 25.00 (mm) Coefficient of gear tooth width 1 Φ d1 = 0.439 The gear has t