大学士论文正文.docVIP

WD-160镗铣床自动控制系统设计 摘　要 本论文论述了以欧陆数字式直流调速器590＋为控制器、以日本三菱可编程逻辑控制器（PLC）为主处理器的镗铣床自动控制系统的硬、软件系统及辅助控制部分的设计及其工作原理，开发了WD-160落地式镗铣床自动控制的完整系统，总结了机床配套电气控制系统的共性特征。内容主要包括：系统控制对象介绍、电气元件参数的计算与选择、可编程逻辑控制器（PLC）及数字式直流调速器590＋的硬件接线和软件设计，相关软硬件的介绍，包括FXGPWIN（三菱公司PLC编程软件）。 WD-160镗铣床以其优秀的机械加工特性，在机械领域占有很重要的地位，而其相对落后的控制系统的改进就显得迫在眉睫。这次对其控制系统的成功改进，更好的使WD-160 镗铣床发挥其性能，跟以往的控制系统相比，有很多的优点： 一、本系统没有采用分离元件，从而使故障率大大降低，而且加工的精度也相应提高。 二、由于采用了可编程逻辑控制器（PLC）和数字式直流调速器590+使系统参数的变更容易了。 由于WD-160立式镗铣床在机械加工中的重要作用，以及本系统跟以往系统相比的优越性，因而，在当今的机械控制中有很高的推广价值。 关键词：落地式镗铣床，四象限全控数字式直流调速器，可编程逻辑控制器，FXGPWIN WD-160 BORING AND MILLING MACHINE AUTOMATIC SYSTEMS DESIGNING ABSTRACT With the automatic control system of boring and milling machine taking 590+ digital direct current governors of Continental Europe as controller, the programmable logic controller of Japanese Mitsubishi (PLC) is a main processor has realized that WD-160 horizontal boring and milling machine automatic systems are designed, overcame and used a great deal of shortcomings of separating control system that the component made up in the past. This text has expounded the fact with the programmable logic controller of Japanese Mitsubishi mainly (PLC) is a main processor, the hardware of the automatic control system of WD-160 horizontal boring and milling machine taking 590+ digital direct current governors of Continental Europe as controller makes up, software system and controlling some designs and their operation principle auxiliarily, summarize lathe form a complete set electric generality characteristic of control system, develop 160 horizontal automatically controlled intact systems of boring and milling machine. The content includes mainly: The system controls the target to introduce, power component calculation, choice and digital direct current 590+ governor and programmable logic hardware wiring and software design of controller (PLC) of parameter, the introduction of the relevant software and hardware, including FXGPWIN (Mitsubishi Company PLC programming