3d max(国外英文资料).docVIP

3d max(国外英文资料) 1) (reference fourteenth) Boolean operations between graphs must be edited by spline, then appended, followed by Boolean operations: (select third of the three red markers in the select, that is, vertices, line segments, splines in splines 1 additional to editable spline object 2 quit attaching 3 choose one of them (part) 4 Boolean (Union, difference sets or intersection) 5 when the Boolean button is pressed, select the object other than the third part, that is, to complete the Boolean operation of the 3DMax line 2) to render, you should first select the render option in the renderer, and render it in rendering 3) three chamfer levels can also be created by chamfering the stereogram 4) there is a shaft under the modifier, click on the axis, and then drag the mouse in the graph to change the axis of the turn 5) lofting: similar to CAD stereo painting in the sweep, is the use of editable spline line as a trace, and then draw a three-dimensional map, the specific operation of: 1. draw an editable spline line as a lofting mark 2. draw out the section 3. in solid mapping, select the composite object (first the basic standard body, and expand the standard body, etc.) 4. select path Take 5. points to get graphics 6., you can edit the set out of the graphics editor 6) press the shift button to move the object, you can copy objects (zoom in / out / rotate) 7) when copying, there is a copy, example, reference, copy after the image will not change with the original changes, examples, reference will change. When changing the reference, the others remain unchanged. The actual operation will know. Copy normally 8) about the operation of the pivot point 8.1) how to change the position of large coordinates (that moving color large coordinate) when choosing objects with moving tools 1. use moving tools to select objects The 2. level of selection button (creation and modification of the row is third, by four white box and a small three line.) 3. select the axis and se