AutoCAD进门之二十四 图纸的打印输进(国外英文资料).doc

AutoCAD入门之二十四 图纸的打印输出(国外英文资料) AutoCAD introduction to the twenty-four drawings of printouts.Txt love is art, marriage is technology, divorce is arithmetic. This year the girls were vying for the small waist fine, who rare small belly Po? Higher than high salaries, paid as long, long as happy. AutoCAD introduction of the twenty-four drawings of the print output Author: Zhu Zhengnan When the custom AutoCAD, we will be thick lines, thin lines, solid, dotted, dashed line are defined respectively to the red and green color, 61, yellow color, color, the number 31 color layer, the annotation to the definition of green the color layer, but did not define their width. When printing, the AutoCAD converts their colors to black in accordance with the data in the print style sheet and gives them the width of the lines. In the created called print style sheet my style , the provisions for the 0.8mm red line width, line width is 0.4mm blue, green line width is 0.15mm, the line width of No. 61 and No. 31 yellow color, the color is 0.1mm. The print menu can be modified by the action menu, file, print style manager, double-click the style sheet file name, and open the print style sheet Editor dialog box. In fact, in the Layer Properties Manager can be defined for each color line width, in this case the name monochrome print style sheet can be printed according to the width of Layer Properties Manager definition. In the page setup dialog box, you can change the print style sheet. Printing is usually done in the layout space, because the layout space reflects the full page of the drawing. The operation menu file to print, in the print dialog box, in the print area, select layout, and click OK to print. In addition to print the complete drawings, you can also print some graphics, print area if the window, click the next button, since the print dialog box temporarily hidden in the drawing out of a box after the dialog box appears, then print out the only box graphics. The print dialog b