cad布局比例(国外英文资料).docVIP

cad布局比例(国外英文资料) How do you set a different scale map in the CAD? Answer： First, the layout (drawing space) is compared with the model space, and the model tabs can obtain unlimited graphic areas. In model space, the 1:1 is plotted, and the final print ratio is assigned to the layout. You can access the virtual graphical table through the layout tab. When you set up the layout, you can notify the size of the table used by autocad. Layout representation graphical table. This layout environment is called the drawing space. If there are several views of the model, the drawing space should be considered. Although the drawing space is designed for 3D printing, it is also useful for 2D layouts. For example, drawing space is indispensable if you want to display the view of the model in different proportions. The drawing space is a special tool for printing several view layouts. It simulates a users printing paper and arranges views on it. The user with the floating viewport view arrangement. Two. Below the steps to create the layout, we illustrate several key points of the layout with a practical example. In the drawing drawing to consider the proportion and layout, while in CAD there is no need to consider the proportion of drawing and layout, only according to the proportion of 1:1 drawing in model space, the scale of the print and how to layout drawings completed by the end of the layout. Can set the layout in model space and then painted a good map. Two default layout CAD, click on the layout of the first page set up a pop-up window, set the printer and paper printing, the proportion is set to 1:1, after determining that automatically generates a viewport viewport, should set up a separate layer for later printing can be hidden line viewport. Insert Title bar. Pinch editing to adjust the viewport size, in the right place, as shown below. But we found that the graph was incomplete because of the fact that the printing ratio had not been adjusted. The establishment of CA